*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Hi from the UK.

  • mikeak2001
  • mikeak2001's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
8 years 7 months ago #5314 by mikeak2001
Hi from the UK. was created by mikeak2001
Hi everyone,
I'm Mike, I work for a Volvo dealership in the U.K., I perform a lot of diagnostics on many makes of vehicles. I have a good understanding of it and enjoy the challenge over standard servicing etc.
I subscribed to ScannerDanner after seeing the slogan "don't be a parts changer", this is the exact way I think. I have too many vehicles brought to me because others have seen a DTC and just changed parts failing to fix the complaint.

Well that's a little bit about me, hope to speak to lots of you at some point.

Cheers
Mike

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
8 years 7 months ago #5326 by Noah
Replied by Noah on topic Hi from the UK.
Hi Mike, welcome to the community!
Look forward to seeing you around.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

  • Dylan
  • Dylan's Avatar
  • Offline
  • Moderator
  • Moderator
  • Belgium, Europe
More
8 years 7 months ago #5343 by Dylan
Replied by Dylan on topic Hi from the UK.
Welcome to the forum Mike ;) Found the right place if you're not into 'just changing parts'...

Please Log in or Create an account to join the conversation.

More
8 years 7 months ago #5454 by Interrupt
Replied by Interrupt on topic Hi from the UK.
Hi Mike, welcome to the community!

Please Log in or Create an account to join the conversation.

Time to create page: 0.315 seconds