*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

Back again, Marty

  • Marti
  • Marti's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
1 year 2 months ago #65989 by Marti
Back again, Marty was created by Marti
I'm back again after being away for a few years.  I'm learning to use oscilloscopes for relative compression tests.  Also just starting to use the scope for ignition problems with coil on plug issues and using a signal probe with the Pico Scope 2204A (cheap) oscilloscope and the I&M 7 software that can be used with this lab scope (non-automotive).  I just got the Topdon Phoenix Plus scanner and really like it.   I've learned a lot about the 5 v reference circuits that are the pulse of the modern engine control system.  I'm a recovering parts changer that is trying to understand these sensors and computer network controlled systems...

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
1 year 2 months ago #66002 by Noah
Replied by Noah on topic Back again, Marty
Hi Marty, welcome (back) to the forum!
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.293 seconds