Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!
We welcome all new members and hope to see you around a lot!
Hello everyone
- Masterse7en
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 1
1 month 1 week ago - 1 month 1 week ago #65063
by Masterse7en
Hello everyone was created by Masterse7en
Hey my fellow mechanics!
just wanted to introduce myself, and say hello to my fellow NON-BACKYARD mechanics lol
My name is Chris, I've been an automotive tech for just over 13 years now, I am ASE Master Tech certified, originally I went to school for microelectronics engineering and computer software development, however cars was my passion since I was just a boy,
So I'm always digging deeper and getting more technical, I have been a member here for a quite a while but I only creeped the forums.
I just wanted to get some scanner comparison info from you guys which I'll ask on the appropriate section but for the time being I wanted to introduce myself.
I have allot of experience in ecm programming and when I say ecm I mean electronic control module not just engine control module lol,
Most of my tools for that are allot of Chinese clones as I'm a father of 3 kids and my wife is a teacher's aid at a school and doesn't make much so I try my best to spend and buy the real tools but I'm sure you all know it isn't that simple.
As far as my scan/programming tools consist of:
Snap on Apollo d9
Snap on Zeus (1st Gen)
Autel maxiSYS ultra EV
with borescope(which I never use because I have a better camera I got from Amazon with 2 cameras on it, one pointing straight down and one pointing diagonal up I'll link it) and autel Bluetooth battery tester
Autel maxi-Im km100
Autel maxi-im608S II pro with G-Box3
Autel TPMS TBE200 tread tool
Autel tpms508wf
Now for the Chinese stuff
Godiag GT100+ breakout box
Godiag GPTboot addon
Carprog 13.77
Iprog+
VXDiag SE all brands
Kessv2+Ktag
Xprog
Scanmatil SM2pro j2534 programmer
CG100-iii programmer/airbag reset tool
XGEcu eeprom programmer
Canalyst-II canbus analyzing tool
And a ton of software some genuine some not but do the job,
I know that's not everything I'm missing some stuff, but that's the gist of it, I have a full soldering rework station at my shop, as well as an HDMI microscope for those soldering and chip swapping needs.
But anyway hi guys and nice to be here hopefully we can help https://ibb.co/Q6nMt03each other out with information
Here's a pic of some of the stuff I listed
just wanted to introduce myself, and say hello to my fellow NON-BACKYARD mechanics lol
My name is Chris, I've been an automotive tech for just over 13 years now, I am ASE Master Tech certified, originally I went to school for microelectronics engineering and computer software development, however cars was my passion since I was just a boy,
So I'm always digging deeper and getting more technical, I have been a member here for a quite a while but I only creeped the forums.
I just wanted to get some scanner comparison info from you guys which I'll ask on the appropriate section but for the time being I wanted to introduce myself.
I have allot of experience in ecm programming and when I say ecm I mean electronic control module not just engine control module lol,
Most of my tools for that are allot of Chinese clones as I'm a father of 3 kids and my wife is a teacher's aid at a school and doesn't make much so I try my best to spend and buy the real tools but I'm sure you all know it isn't that simple.
As far as my scan/programming tools consist of:
Snap on Apollo d9
Snap on Zeus (1st Gen)
Autel maxiSYS ultra EV
with borescope(which I never use because I have a better camera I got from Amazon with 2 cameras on it, one pointing straight down and one pointing diagonal up I'll link it) and autel Bluetooth battery tester
Autel maxi-Im km100
Autel maxi-im608S II pro with G-Box3
Autel TPMS TBE200 tread tool
Autel tpms508wf
Now for the Chinese stuff
Godiag GT100+ breakout box
Godiag GPTboot addon
Carprog 13.77
Iprog+
VXDiag SE all brands
Kessv2+Ktag
Xprog
Scanmatil SM2pro j2534 programmer
CG100-iii programmer/airbag reset tool
XGEcu eeprom programmer
Canalyst-II canbus analyzing tool
And a ton of software some genuine some not but do the job,
I know that's not everything I'm missing some stuff, but that's the gist of it, I have a full soldering rework station at my shop, as well as an HDMI microscope for those soldering and chip swapping needs.
But anyway hi guys and nice to be here hopefully we can help https://ibb.co/Q6nMt03each other out with information
Here's a pic of some of the stuff I listed
Last edit: 1 month 1 week ago by Masterse7en.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 4428
- Thank you received: 962
1 month 1 week ago #65082
by Noah
"Ground cannot be checked with a 10mm socket"
Replied by Noah on topic Hello everyone
Welcome to the forum, thanks for taking the time to introduce yourself.
"Ground cannot be checked with a 10mm socket"
The following user(s) said Thank You: Masterse7en
Please Log in or Create an account to join the conversation.
- Masterse7en
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 1
1 month 5 days ago #65097
by Masterse7en
Replied by Masterse7en on topic Hello everyone
Thanks Noah!
Oh BTW i said i would link the Dual Lens camera i had just in case, here it is
www.amazon.com/gp/product/B09CK7P84F/ref..._title?ie=UTF8&psc=1
Oh BTW i said i would link the Dual Lens camera i had just in case, here it is
www.amazon.com/gp/product/B09CK7P84F/ref..._title?ie=UTF8&psc=1
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 4428
- Thank you received: 962
1 month 5 days ago #65104
by Noah
"Ground cannot be checked with a 10mm socket"
Replied by Noah on topic Hello everyone
Daxiongmao Two-Way Articulating...
www.amazon.com/dp/B0C3TZD2S4?ref=ppx_pop_mob_ap_share
This is the one I got from Amazon. Only one lens, but the articulating head is a really nice feature. I can put it in a cylinder and look back up at the valves
This is the one I got from Amazon. Only one lens, but the articulating head is a really nice feature. I can put it in a cylinder and look back up at the valves
"Ground cannot be checked with a 10mm socket"
Please Log in or Create an account to join the conversation.
Time to create page: 0.417 seconds