Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

2007 hyundai santa fe

  • dfends@hotmail.com
  • dfends@hotmail.com's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
6 years 5 months ago #34442 by dfends@hotmail.com
2007 hyundai santa fe was created by dfends@hotmail.com
Good morning everyone i have a 2007 santa fe touble code p0133 its a v6 here is freeeze frame data

caluclated load 23.1
coolant temp 80 c
short term bank1 -10.2
long term bank 1 7.0
short term bank 2 -7.0
long term bank 2 10.2
map sensor 37.0kpa
vehicel speed 94kmh
ing timing adv cyl 1 40.5
iat 6c
maf 14.4 g/s

im thinking the possible maf ? any help would be appreciated thank you in advance

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #34444 by robert.lesaca
Replied by robert.lesaca on topic 2007 hyundai santa fe
how are O2 sensors?

Please Log in or Create an account to join the conversation.

  • dfends@hotmail.com
  • dfends@hotmail.com's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
6 years 5 months ago #34445 by dfends@hotmail.com
Replied by dfends@hotmail.com on topic 2007 hyundai santa fe
bank one sensor one has been replaced and the short term and long term are ok

Please Log in or Create an account to join the conversation.

  • dfends@hotmail.com
  • dfends@hotmail.com's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
6 years 5 months ago #34447 by dfends@hotmail.com
Replied by dfends@hotmail.com on topic 2007 hyundai santa fe
update

i was monitoring post cat 02 sensors and bank one was running lean and compared to bank 2 was a big difference . the vehicle had a tune up done at another shop recently . the plugs for the 02 sensor are side by side and plugs are the same so i swapped the connectors and the post cat sensor started acting properly problem solved . thanks to everyone for all your help

Please Log in or Create an account to join the conversation.

Time to create page: 0.256 seconds