Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
i have a situation where im getting 4 different readings on the control wire, and i know this isn’t right
Are you using a DVOM? If you are, the voltage will be anywhere from 0-5v (you could try max/min if your DVOM has it). The DVOM is too slow to read the control signal. It is a 5 volt square wave, an oscilloscope is required to view it. The other 2 pins are B+ and GROUND.
