*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

[Solved]2jz no start

  • Tyler
  • Tyler's Avatar
  • Offline
  • Moderator
  • Moderator
  • Full time HACK since 2012
More
8 years 11 months ago #2764 by Tyler
Replied by Tyler on topic [Solved]2jz no start
Sweet! Awesome to have a fix after all this time/work B)

I had heard about wiring VRS sensors backwards before, causing no start problems, but I've never run into one personally. I've always wondered how you'd go about diagnosing one, beyond physically tracing out each wire.

Please Log in or Create an account to join the conversation.

  • Caritech
  • Caritech's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
8 years 11 months ago #2773 by Caritech
Replied by Caritech on topic [Solved]2jz no start
This job really reinforced the need to have readings from known good components/vehicles. I was just operating on the fact that I was getting a signal and the amplitude was good causing me to take the path I did. This one will definitely influence my approach to diagnosing and questioning in the future.

Please Log in or Create an account to join the conversation.

Time to create page: 0.384 seconds