*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

03 wrangler 2.4 can frequency

  • gilmc88
  • gilmc88's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
11 months 2 weeks ago #67138 by gilmc88
03 wrangler 2.4 can frequency was created by gilmc88
Morning folks, forgive me for this, I'm old and not computer literate so getting yall the file ain't happening yet. Pic will have to do for now.
03 wrangler setting p1391 cam or crank intermittent.
Someone has hacked in a new cam sensor, and here's a pic of a printed capture. Maybe. If I did this correctly.
The red circle at top is 2 throttle snaps.
The bottom pic is also a throttle snap...
I'll probably figure it out before I check back here, this is as much learning how to use all this as much as it is learning scope.
I really don't know what I'm seeing here so any thoughts are appreciated. 
Provided the pic even loaded.

Please Log in or Create an account to join the conversation.

  • gilmc88
  • gilmc88's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
11 months 2 weeks ago #67139 by gilmc88
Replied by gilmc88 on topic 03 wrangler 2.4 can frequency
Looks like cam sensor installed too deep and rubbing gear. Can see metal all inside there...

Please Log in or Create an account to join the conversation.

Time to create page: 0.330 seconds