Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
I am working on a 2012 Land rover Range Rover S/C 5.0. The front suspension was saggy so the front valve block was replaced thinking it was leaking back into the system.
Customer bought a scanner to recalibrate the suspension after the front block was replaced. While trying to recalibrate, the Icarsoft scanner is saying Front and Rear Cross link valves open.
The suspension would not calibrate, and I'm assuming it's due to the valves staying fully open. The switch is in normal driving mode, but something is telling it to be in Off-road, being they are fully open.
There are no fault codes, or messages on dash. What could be telling the valves to be fully open, even in normal ride height?
Thank you.
Help me so Im not a parts changer. I appreciate your help!
Topic Author
