*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!

Secondary ignition waveform burn line jumping?

  • Stanner
  • Stanner's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
1 year 4 days ago - 1 year 4 days ago #66925 by Stanner
Secondary ignition waveform burn line jumping? was created by Stanner
2007 jeep liberty 

Secondary ignition waveform is strange its jumping up and down and almost looks like it's cutting out at times too?? could be my scope or trigger setting bit ive never had waveform jump around like this, I uploaded video of it







 
Last edit: 1 year 4 days ago by Stanner.

Please Log in or Create an account to join the conversation.

  • Stanner
  • Stanner's Avatar Topic Author
  • Offline
  • New Member
  • New Member
More
1 year 3 days ago #66937 by Stanner
Replied by Stanner on topic Secondary ignition waveform burn line jumping?
Guess the forum isn't really active here hmm

Please Log in or Create an account to join the conversation.

  • Noah
  • Noah's Avatar
  • Offline
  • Moderator
  • Moderator
  • Give code definitions with numbers!
More
1 year 3 days ago #66938 by Noah
Replied by Noah on topic Secondary ignition waveform burn line jumping?

Guess the forum isn't really active here hmm
There's days I guess it's slow...
For what it's worth, I don't see anything that would raise any red flags, especially if it doesn't misfire when you see that glitch.
"Ground cannot be checked with a 10mm socket"

Please Log in or Create an account to join the conversation.

Time to create page: 0.308 seconds