Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
2008 avalanche 5.3 Lc9
APP Pedal Position Sensor 2 Circuit High Voltage code
Throttle Position sensor 1 and 2 sweep test voltage tests pass.Accelerator pedal position sensor 2 indicated position is stuck at 99% and Accelerator pedal position sensor 2 is stuck at 4.92 volts. Any suggestions moving forward would be much appreciated
5v reference wires at the pedal connector check out ok
I'm guilty of a parts changer while I was waiting for my scanner to arrive. No change in values from the new accelerator pedal. Also all body/engine grounds/straps have been replaced and or checked out good. Relays and fuses also checked out ok
