Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
this spring the starter went out got changed, then a few months later the ignition key stated turning 360 degrees, replaced it and the starter switch. last week went out to move the car and no problems got done with my work and went to move the car back and NOTHING no click, nothing the radio comes on and the dash lights up but no start, checked my six month old battery 12.5,tried wiggling the shifter and NO good jumped the started and boom running great, so I tried watching Scanner dans you tube video and my jeep is close to the same year as the one he was working on and the same color wires, but no jumper and i had power every where he did but not the starter solenoid under the hood, changed them out with each other and still no power to post 86 to 85- 85 has a ground and so does 87 plus 30 is hot. my problem is i bought a new neutral safety switch and still nothing to 86. now I am lost all my diagrams show the power coming from the ingition switch and the yellow wire and it is hot at start. and my ground goes out when move the shifter out of park ,any ideas Oh and NO After market anything on the car (all original.
Closing your help request with the fix is not only courteous to the members who attempted to help you, but also may help other people in the future with a similar issue.
What did you find?
Topic Author
