Help us help you. By posting the year, make, model and engine near the beginning of your help request, followed by the symptoms (no start, high idle, misfire etc.) Along with any prevalent Diagnostic Trouble Codes, aka DTCs, other forum members will be able to help you get to a solution more quickly and easily!
2007 ford fusion 2.3 engine automatic transmission no crank.
- Gogman46
-
Topic Author
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
3 years 5 months ago #57100
by Gogman46
2007 ford fusion 2.3 engine automatic transmission no crank. was created by Gogman46
I did an engine swap. Car cranked up a few times then all a sudden it wouldn't crank back up. All dash lights comes on anti theft light comes on and goes out when I turn the key into the start position. If I jump the S wire to the battery wire the car starts up. I swap the ignition switch from a used car still nothing. And the starter relay is none serviceable in the smart junction box driver side kick panel. Any idea to what I should do? I try to repair my own cars but I'm will to pay for a live video walk through of me diagnosing it if possible. Thanks for reading this.
Please Log in or Create an account to join the conversation.
- Cheryl
-
- Offline
- Platinum Member
-
Less
More
- Posts: 1214
- Thank you received: 215
3 years 5 months ago #57105
by Cheryl
Replied by Cheryl on topic 2007 ford fusion 2.3 engine automatic transmission no crank.
Any codes in the modules? Does the car think it’s in neutral and park when you move the shifter in those positions
Please Log in or Create an account to join the conversation.
- Gogman46
-
Topic Author
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
3 years 5 months ago #57107
by Gogman46
Replied by Gogman46 on topic 2007 ford fusion 2.3 engine automatic transmission no crank.
No engine light only the wrench light. But when I jump the S wire on the starter its cranks but shows data error
Please Log in or Create an account to join the conversation.
- Cheryl
-
- Offline
- Platinum Member
-
Less
More
- Posts: 1214
- Thank you received: 215
3 years 5 months ago #57108
by Cheryl
Replied by Cheryl on topic 2007 ford fusion 2.3 engine automatic transmission no crank.
Scan it anywhere and look at inputs for the neutral and park positions
Please Log in or Create an account to join the conversation.
- Gogman46
-
Topic Author
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 0
3 years 5 months ago #57109
by Gogman46
Replied by Gogman46 on topic 2007 ford fusion 2.3 engine automatic transmission no crank.
I've got a regular harbor freight scanner I guess I can figure out how to test for park and neutral
Please Log in or Create an account to join the conversation.
Time to create page: 0.319 seconds