*** Restricting New Posts to SD Premium Members ONLY *** (09 May 2025)

Just made a new account? Can't post? Click above.

A place to discuss hardware/software and diagnostic procedures

Anyone using the Autel MP408 oscilloscope

  • Ben
  • Ben's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
4 years 5 months ago #47935 by Ben
Anyone using the Autel MP408 oscilloscope was created by Ben
I'm retiring my modis ultra with a 2 channel scope and looking to replace it with an 4 or 8 channel scope im curious if the autel scope is usable in automotive or if I just need to save for the pico ?

Sent from my SM-G781U using Tapatalk

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #48003 by Andy.MacFadyen
Replied by Andy.MacFadyen on topic Anyone using the Autel MP408 oscilloscope
Autel's MP408 they put some effort in to developing the current software and if you look through some of the more recent YouTube videos on it turned into a pretty decent scope.
" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)
The following user(s) said Thank You: Ben

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #48025 by John Curtis
Replied by John Curtis on topic Anyone using the Autel MP408 oscilloscope
I use it daily. It’s a fairly good scope and certainly best bang for the buck. Only complaint is the software
Making Pressure Differential Sensors (PDA Sensors) for pressure pulse diagnostics.
Currently servicing Central Texas.
The following user(s) said Thank You: Ben

Please Log in or Create an account to join the conversation.

Time to create page: 0.341 seconds