A place to discuss hardware/software and diagnostic procedures

injector timer tool

scopeman
Topic Author
Offline
Senior Member

9 years 4 months ago - 9 years 4 months ago #1584 by scopeman

injector timer tool was created by scopeman

No eBay APP ID and/or Cert ID defined in Kunena configurationHi has anyone used one of these timer tool for checking injectors? wondering if they are any good and are there any limitations using this type.

for some reason not showing link.

Last edit: 9 years 4 months ago by scopeman.

Please Log in or Create an account to join the conversation.

Doc
Offline
Senior Member
Sharing the little I know

9 years 4 months ago #1585 by Doc

Replied by Doc on topic injector timer tool

I have a VS211 Sealey tool from McCormick tools, it works well enough for a budget tool.
Cheers

Youtuber specialising in Diagnostic techniques, sharing skills and helping technicians be the best they can be #Picoflu

Please Log in or Create an account to join the conversation.

Andy.MacFadyen
Offline
Moderator

9 years 4 months ago - 9 years 4 months ago #1589 by Andy.MacFadyen

Replied by Andy.MacFadyen on topic injector timer tool

Rendering Error in layout Message/Item: Kunena\Forum\Libraries\BBCode\KunenaBBCodeLibrary::renderEbayLayout(): Argument #1 ($ItemID) must be of type int, string given, called in /home/i81rb962hx44/public_html/libraries/kunena/src/BBCode/KunenaBBCode.php on line 304. Please enable debug mode for more information.

Please Log in or Create an account to join the conversation.

scopeman
Topic Author
Offline
Senior Member

9 years 4 months ago #1608 by scopeman

Replied by scopeman on topic injector timer tool

Thanks Andy,not sure why i could not get link to work but yes that is the one .Will be getting one of these soon just to add to tool kit .Where did you get the connectors from? or did you make your own.In the online instructions it says it can be connected with either lead to the injector,is this right ?

Cheers

Please Log in or Create an account to join the conversation.

Andy.MacFadyen
Offline
Moderator

9 years 4 months ago - 9 years 4 months ago #1612 by Andy.MacFadyen

Replied by Andy.MacFadyen on topic injector timer tool

Injectors usually work fine connected with the polarity reversed but I try to make sure I keep the + & - the original way round.
Just used a few standard injector connectors salvage from junkers.

" We're trying to plug a hole in the universe, what are you doing ?. "
(Walter Bishop Fringe TV show)

Last edit: 9 years 4 months ago by Andy.MacFadyen.

Please Log in or Create an account to join the conversation.

Noah
Offline
Moderator
Give code definitions with numbers!

9 years 4 months ago #1689 by Noah

Replied by Noah on topic injector timer tool

That's the same one I use. Good cheap tool. I also have some pig tails I made from junk harness connectors to make it easier to use.

"Ground cannot be checked with a 10mm socket"

The following user(s) said Thank You: scopeman

Please Log in or Create an account to join the conversation.

scopeman
Topic Author
Offline
Senior Member

9 years 4 months ago #1719 by scopeman

Replied by scopeman on topic injector timer tool

Cheers everyone will be adding one soon.

Please Log in or Create an account to join the conversation.

ScannerDanner
Offline
Administrator
Religion says do, Jesus says done!

9 years 4 months ago #1734 by ScannerDanner

Replied by ScannerDanner on topic injector timer tool

Here is the one I am using.
www.jbtoolsales.com/otc-3398-electric-fu...r-tester/#oid=1014_1

Don't be a parts changer!

Please Log in or Create an account to join the conversation.

Time to create page: 0.277 seconds